Need a grip screw for k frame

BuffcoBuffco Senior MemberPosts: 6,244 Senior Member
Where can I get one?

Weatherby this is the model 15-3 I was talking about.

Replies

  • BuffcoBuffco Senior Member Posts: 6,244 Senior Member
    py5a2aju.jpg
  • BigDanSBigDanS Senior Member Posts: 6,803 Senior Member
    nice!
    "A patriot is mocked, scorned and hated; yet when his cause succeeds, all men will join him, for then it costs nothing to be a patriot." Mark Twain
    Alcohol, Tobacco, Firearms and Explosives.... now who's bringing the hot wings? :jester:
  • Gene LGene L Senior Member Posts: 10,258 Senior Member
    Ebay has them. Is this a nickel gun?
    Not too many problems you can't fix
    With a 1911 and a 30-06
  • BuffcoBuffco Senior Member Posts: 6,244 Senior Member
    Yes
  • Gene LGene L Senior Member Posts: 10,258 Senior Member
    Very nice. You might be able to find a grip screw at a LGS, or cheaper from gunparts.com.
    Not too many problems you can't fix
    With a 1911 and a 30-06
  • Gene LGene L Senior Member Posts: 10,258 Senior Member
    Hold on: I've got one for a K-frame pachmyer grip. It ought to work. It's black, but you could polish it off it it will fit, which I think it will. pm me your address and I'll send it to you.
    Not too many problems you can't fix
    With a 1911 and a 30-06
  • breamfisherbreamfisher Senior Member Posts: 13,115 Senior Member
    Overkill is underrated.
  • NNNN Senior Member Posts: 23,968 Senior Member
    :yousuck:
    A Veteran is someone that served in the Military, it does not matter where they served.
  • Gene LGene L Senior Member Posts: 10,258 Senior Member
    Those things go perfect with a Tyler T-Grip, nickel, of course. They're kinda hard to find, but look great on a pistol like that. Much better than over-size target grips.
    Not too many problems you can't fix
    With a 1911 and a 30-06
  • bullsi1911bullsi1911 Moderator Posts: 9,731 Senior Member
    Gene L wrote: »
    Those things go perfect with a Tyler T-Grip, nickel, of course. They're kinda hard to find, but look great on a pistol like that. Much better than over-size target grips.

    I've been trying to get a T-Grip for my 66 for a LONG time. Seems there has been some turmoil in that company
    To make something simple is a thousand times more difficult than to make something complex.
    -Mikhail Kalashnikov
  • Gene LGene L Senior Member Posts: 10,258 Senior Member
    I've got them on both my K-frames. I had to go to Ebay to find one, NIB. The Model 19 had one on it already.
    Not too many problems you can't fix
    With a 1911 and a 30-06
  • Big ChiefBig Chief Senior Member Posts: 32,995 Senior Member
    Nice Horace n Daniel. I got a nickel model 13 which looks very similar to yours sans adjustable sights.
    It's only true if it's on this forum where opinions are facts and facts are opinions
    Words of wisdom from Big Chief: Flush twice, it's a long way to the Mess Hall
    I'd rather have my sister work in a whorehouse than own another Taurus!
  • KENFU1911KENFU1911 Senior Member Posts: 1,052 Senior Member
    Is it the right grip screw..or the left one????????.......Ken
    My idea of a warning shot is when the 2nd bad guy watches his 1st buddy go down....
  • BuffcoBuffco Senior Member Posts: 6,244 Senior Member
    KENFU1911 wrote: »
    Is it the right grip screw..or the left one????????.......Ken
    mikewoodsonface.gif
  • KENFU1911KENFU1911 Senior Member Posts: 1,052 Senior Member
    :rotflmao:
    My idea of a warning shot is when the 2nd bad guy watches his 1st buddy go down....
  • Big ChiefBig Chief Senior Member Posts: 32,995 Senior Member
    I have several sets of N frame wooden S&W grips in my garage in FLA. I think from when I changed them out for rubbbers. I almost gave them aw3ay, but found out they bring a pretty penny.

    You should be able to order the correct screw easily enough, if not let me know. I don't think screws made for Pachmayr's will work because of the threads/insert captive nut, but I may be wrong.
    It's only true if it's on this forum where opinions are facts and facts are opinions
    Words of wisdom from Big Chief: Flush twice, it's a long way to the Mess Hall
    I'd rather have my sister work in a whorehouse than own another Taurus!
  • WeatherbyWeatherby Senior Member Posts: 4,772 Senior Member
    Buffco wrote: »
    Where can I get one?

    Weatherby this is the model 15-3 I was talking about.

    Nice looking Smith Bryant thus far I've been lucky and my LGS guy has given them to me when needed.
    I suppose I've paid for them many times over with my frequent buyer program.
Sign In or Register to comment.
Magazine Cover

GET THE MAGAZINE Subscribe & Save

Temporary Price Reduction

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW THIS MONTH'S ISSUE

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Get the top Guns & Ammo stories delivered right to your inbox every week.