Forums

Forum Menu
Home› Main Category› General Firearms

Going to try a Rock Island.....

twatwa Senior MemberPosts: 2,238 Senior Member
in General Firearms #1
A lot of guys here talking up the Rock Island 1911's so I decided I am going to give one a shot. I am on a 1911 kick and have been wanting one in 9mm. This one looks nice, looks to have some great features and was just down right cheap for a brand new gun. I hope I won't be disappointed.



http://www.gunbroker.com/Auction/ViewItem.aspx?Item=465990811




51623.jpg
· Share on TwitterShare on Facebook
«1

Replies

  • Elk creekElk creek Senior Member Posts: 6,450 Senior Member
    #2
    Can't go wrong with a 1911, of any flavor!
    Aim higher, or get a bigger gun.
    · Share on TwitterShare on Facebook
  • Big ChiefBig Chief Senior Member Posts: 32,995 Senior Member
    #3
    Congrats on your acquisition :guns::guns:

    Range report when you can.
    It's only true if it's on this forum where opinions are facts and facts are opinions
    Words of wisdom from Big Chief: Flush twice, it's a long way to the Mess Hall
    I'd rather have my sister work in a whorehouse than own another Taurus!
    · Share on TwitterShare on Facebook
  • twatwa Senior Member Posts: 2,238 Senior Member
    #4
    TrueTone911 wrote: »
    I was hoping you were going to say .22 TCM. Something about that gun intrigues me. I don't yet have a 1911. But when I do, it might very well be in 9mm.

    I took a gander at those, but just don't care for the looks of that gun. The cartridge intrigues me, but they need to doll it up a bit first.
    · Share on TwitterShare on Facebook
  • shotgunshooter3shotgunshooter3 Senior Member Posts: 5,742 Senior Member
    #5
    Excellent choice! IMO 9mm 1911's are vastly underrated, I'm glad to see them gaining popularity.
    - I am a rifleman with a poorly chosen screen name. -
    "Slow is smooth, smooth is fast, and speed is the economy of motion" - Scott Jedlinski
    · Share on TwitterShare on Facebook
  • NCFUBARNCFUBAR Senior Member Posts: 4,324 Senior Member
    #6
    twa wrote: »
    I took a gander at those, but just don't care for the looks of that gun. The cartridge intrigues me, but they need to doll it up a bit first.

    It would not surprise me if they come out with a barrel swap for that 9mm to go .22TCM in the future to try and keep the little cartridge growing.
    “The further a society drifts from truth ... the more it will hate those who speak it."
    - George Orwell
    · Share on TwitterShare on Facebook
  • breamfisherbreamfisher Senior Member Posts: 13,495 Senior Member
    #7
    I'd be tempted to get one of those, ream the barrel from 9mm to .38 Super, and swap mags for .38 Super. From what I understand, that's what it takes to change it from 9mm to .38 Super.

    Ooooooooooooooooooor..... fit a .38 Super barrel, get .38 Super mags, and have a convertible 9mm to .38 Super.

    Nice score.
    Overkill is underrated.
    · Share on TwitterShare on Facebook
  • Big ChiefBig Chief Senior Member Posts: 32,995 Senior Member
    #8
    shotgunshooter3 wrote: »
    Excellent choice! IMO 9mm 1911's are vastly underrated, I'm glad to see them gaining popularity.

    And under chambered in caliber :tooth:


    Actually, they are kinda fun to shoot like yours. I kept expecting a recoil impulse like a .45, but it doesn't come. Folks in general should be able to control and shoot them better than a .45 theoretically, I reckon.
    It's only true if it's on this forum where opinions are facts and facts are opinions
    Words of wisdom from Big Chief: Flush twice, it's a long way to the Mess Hall
    I'd rather have my sister work in a whorehouse than own another Taurus!
    · Share on TwitterShare on Facebook
  • jbp-ohiojbp-ohio Senior Member Posts: 10,165 Senior Member
    #9
    NCFUBAR wrote: »
    It would not surprise me if they come out with a barrel swap for that 9mm to go .22TCM in the future to try and keep the little cartridge growing.

    They do............. they even have a combo package

    pix165724792.jpg
    "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." Thomas Jefferson
    · Share on TwitterShare on Facebook
  • Big ChiefBig Chief Senior Member Posts: 32,995 Senior Member
    #10
    breamfisher wrote: »
    I'd be tempted to get one of those, ream the barrel from 9mm to .38 Super, and swap mags for .38 Super. From what I understand, that's what it takes to change it from 9mm to .38 Super.

    Ooooooooooooooooooor..... fit a .38 Super barrel, get .38 Super mags, and have a convertible 9mm to .38 Super.

    Nice score.


    You going MAJOR huh? Not a bad idy at all come to think of it with the versatility to shoot less expensive and usually available 9mm and .38 Super from the same gun. Cheaper than the good .22 conversion kits they used to make too. Having all three would be cool.
    It's only true if it's on this forum where opinions are facts and facts are opinions
    Words of wisdom from Big Chief: Flush twice, it's a long way to the Mess Hall
    I'd rather have my sister work in a whorehouse than own another Taurus!
    · Share on TwitterShare on Facebook
  • jbp-ohiojbp-ohio Senior Member Posts: 10,165 Senior Member
    #11
    breamfisher wrote: »
    I'd be tempted to get one of those, ream the barrel from 9mm to .38 Super, and swap mags for .38 Super. From what I understand, that's what it takes to change it from 9mm to .38 Super.

    Ooooooooooooooooooor..... fit a .38 Super barrel, get .38 Super mags, and have a convertible 9mm to .38 Super.

    Nice score.

    They make a GI in .38 Super, don't know why they wouldn't have one in the other lines???
    "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." Thomas Jefferson
    · Share on TwitterShare on Facebook
  • snake284snake284 Senior Member Posts: 22,394 Senior Member
    #12
    twa wrote: »
    A lot of guys here talking up the Rock Island 1911's so I decided I am going to give one a shot. I am on a 1911 kick and have been wanting one in 9mm. This one looks nice, looks to have some great features and was just down right cheap for a brand new gun. I hope I won't be disappointed.



    http://www.gunbroker.com/Auction/ViewItem.aspx?Item=465990811




    51623.jpg
    Well I hope they don't arrest you. I mean for stealing the damn thing,

    :rotflmao::rotflmao::rotflmao:

    That sure is cheap for a 1911 for this day and time. I think they're made in the Philippines. If their QC is as good as I've heard you shouldn't have any problems and I bet it will shoot good. So the usual is in order here, Congrats, you suck and all that jazz.
    Daddy, what's an enabler?
    Son that's somebody with nothing to do with his time but keep me in trouble with mom.
    · Share on TwitterShare on Facebook
  • JayhawkerJayhawker Moderator Posts: 16,925 Senior Member
    #13
    breamfisher wrote: »
    I'd be tempted to get one of those, ream the barrel from 9mm to .38 Super, and swap mags for .38 Super. From what I understand, that's what it takes to change it from 9mm to .38 Super.

    Ooooooooooooooooooor..... fit a .38 Super barrel, get .38 Super mags, and have a convertible 9mm to .38 Super.

    Nice score.

    Uhhhhh...maybe I'm not getting it...but why not just buy one in .38 Super?
    Sharps Model 1874 - "The rifle that made the west safe for Winchester"
    · Share on TwitterShare on Facebook
  • JayhawkerJayhawker Moderator Posts: 16,925 Senior Member
    #14
    You won't be disappointed...I have several Philippine-made 1911s...not a lemon in the bunch...
    Sharps Model 1874 - "The rifle that made the west safe for Winchester"
    · Share on TwitterShare on Facebook
  • breamfisherbreamfisher Senior Member Posts: 13,495 Senior Member
    #15
    Jayhawker wrote: »
    Uhhhhh...maybe I'm not getting it...but why not just buy one in .38 Super?
    They only make the .38 Super in GI configuration. That means for me I'd need new sights, hammer, and a beavertail grip safety. That's why I'd just be tempted to have the barrel rechambered and get new mags.
    Overkill is underrated.
    · Share on TwitterShare on Facebook
  • NCFUBARNCFUBAR Senior Member Posts: 4,324 Senior Member
    #16
    jbp-ohio wrote: »
    They do............. they even have a combo package

    pix165724792.jpg

    I think that is the double stack TCM that has the 9mm barrel conversion. I mean they'll come out with a TCM that can drop it the single stack 9mm which shouldn't be hard.
    “The further a society drifts from truth ... the more it will hate those who speak it."
    - George Orwell
    · Share on TwitterShare on Facebook
  • JayhawkerJayhawker Moderator Posts: 16,925 Senior Member
    #17
    breamfisher wrote: »
    They only make the .38 Super in GI configuration. That means for me I'd need new sights, hammer, and a beavertail grip safety. That's why I'd just be tempted to have the barrel rechambered and get new mags.

    I would think that the barrel reaming, etc, etc, etc would pretty much even out with buying the parts....
    Sharps Model 1874 - "The rifle that made the west safe for Winchester"
    · Share on TwitterShare on Facebook
  • breamfisherbreamfisher Senior Member Posts: 13,495 Senior Member
    #18
    They do, just gotta get one with a rail...

    https://us.armscor.com/products/tcm-tac-ultra-fs-combo-22tcm-9mm

    https://us.armscor.com/products/tcm-tac-ultra-ms-combo-22tcm-9mm
    Overkill is underrated.
    · Share on TwitterShare on Facebook
  • breamfisherbreamfisher Senior Member Posts: 13,495 Senior Member
    #19
    Jayhawker wrote: »
    I would think that the barrel reaming, etc, etc, etc would pretty much even out with buying the parts....
    Maybe, have to give it a look.
    Overkill is underrated.
    · Share on TwitterShare on Facebook
  • twatwa Senior Member Posts: 2,238 Senior Member
    #20
    breamfisher wrote: »
    They do, just gotta get one with a rail...

    https://us.armscor.com/products/tcm-tac-ultra-fs-combo-22tcm-9mm

    https://us.armscor.com/products/tcm-tac-ultra-ms-combo-22tcm-9mm

    Somehow I think my $429 price just went out the door :jester:
    · Share on TwitterShare on Facebook
  • twatwa Senior Member Posts: 2,238 Senior Member
    #21
    NCFUBAR wrote: »
    It would not surprise me if they come out with a barrel swap for that 9mm to go .22TCM in the future to try and keep the little cartridge growing.

    Hope your right, that would be the way to go, just a drop in barrel and run.
    · Share on TwitterShare on Facebook
  • NCFUBARNCFUBAR Senior Member Posts: 4,324 Senior Member
    #22
    The single stack combos say pre-order so they will have a barrel conversion before to long ... even better pickup!
    “The further a society drifts from truth ... the more it will hate those who speak it."
    - George Orwell
    · Share on TwitterShare on Facebook
  • knitepoetknitepoet Senior Member Posts: 21,095 Senior Member
    #23
    twa wrote: »
    Hope your right, that would be the way to go, just a drop in barrel and recoil spring and run.
    FIFY :tooth:

    My 10mm is a RIA and I have been thoroughly pleased with it after changing the grips and removing the mag funnel (sold them). I find those VZ grips TOO aggressive for my tastes.

    Mine's accurate, reliable and has a great trigger & sights
    Seven Habits of Highly Effective Pirates, Rule #37: There is no “overkill”. There is only “open fire” and “I need to reload”.


    · Share on TwitterShare on Facebook
  • DanChamberlainDanChamberlain Senior Member Posts: 3,395 Senior Member
    #24
    If you buy a 9mm, and ream out the barrel to .38 super, you can't use 9mm in it, because they headspace on the case rim and the 9mm will fall too far into the chamber. You'd need to have two barrels. So, why would you ream out a barrel? RIA makes .38 Supers, so you should be able to get a .38 Super barrel and skip the gunsmithing, with the exception of any fitting that needed to be done. I'm sure you knew that, but the post didn't indicate it.
    It's a source of great pride for me, that when my name is googled, one finds book titles and not mug shots. Daniel C. Chamberlain
    · Share on TwitterShare on Facebook
  • NNNN Senior Member Posts: 24,714 Senior Member
    #25
    Get a Range Officer whatever the price difference.
    Shut up-----KAREN; OK Cynthia
    · Share on TwitterShare on Facebook
  • CHIRO1989CHIRO1989 Senior Member Posts: 12,635 Senior Member
    #26
    CDNN had the 9mm Rock Island for $399 not that long ago, kicking myself for not grabbing one then.
    I take no pleasure in the death of the wicked, but rather that they turn away from their ways and live. Eze 33:11
    · Share on TwitterShare on Facebook
  • Big ChiefBig Chief Senior Member Posts: 32,995 Senior Member
    #27
    Wambli Ska wrote: »
    I'm really liking RIAs lineup! I think my next 1911 will be one of their 10mm guns.

    Whoa there Hoss................you sure gotta funny way of thinning the herd :tooth:

    Reverse psychology........can't see the forest fer the trees? :roll2::roll2:
    It's only true if it's on this forum where opinions are facts and facts are opinions
    Words of wisdom from Big Chief: Flush twice, it's a long way to the Mess Hall
    I'd rather have my sister work in a whorehouse than own another Taurus!
    · Share on TwitterShare on Facebook
  • shotgunshooter3shotgunshooter3 Senior Member Posts: 5,742 Senior Member
    #28
    I wouldn't mind if one of their 10mm's showed up in my safe.
    - I am a rifleman with a poorly chosen screen name. -
    "Slow is smooth, smooth is fast, and speed is the economy of motion" - Scott Jedlinski
    · Share on TwitterShare on Facebook
  • twatwa Senior Member Posts: 2,238 Senior Member
    #29
    knitepoet wrote: »
    FIFY :tooth:

    My 10mm is a RIA and I have been thoroughly pleased with it after changing the grips and removing the mag funnel (sold them). I find those VZ grips TOO aggressive for my tastes.

    Mine's accurate, reliable and has a great trigger & sights

    Those grips do look a little aggressive but may not be bad for a 9mm. I remember you saying you really like yours, you are one of the enablers that made this happen! :beer:
    · Share on TwitterShare on Facebook
  • twatwa Senior Member Posts: 2,238 Senior Member
    #30
    CHIRO1989 wrote: »
    CDNN had the 9mm Rock Island for $399 not that long ago, kicking myself for not grabbing one then.

    You can still get a bare bones RIA 9mm for under $400.

    http://www.gunbroker.com/Auction/ViewItem.aspx?Item=465417442
    · Share on TwitterShare on Facebook
  • twatwa Senior Member Posts: 2,238 Senior Member
    #31
    cpj wrote: »
    Problem is the sights suck. Would end up costing more to put decent sights on it.

    Agreed
    · Share on TwitterShare on Facebook
Sign In or Register to comment.
Magazine Cover

GET THE MAGAZINE Subscribe & Save

Temporary Price Reduction

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW THIS MONTH'S ISSUE

MORE YOU MAY BE INTERESTED IN

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Get the top Guns & Ammo stories delivered right to your inbox every week.

Sign Me Up
Advertisement