Man cave stuff

11516171921

Replies

  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    I have a done stamp on the gutters & downs today. The wind made it feel colder than it was.
    The job turned out ok & all I need to do is make a rubber gasket for the downs so dirt & dust doesn't get in the water. In this pic you see the $10.00 tanks.

  • timctimc Senior Member Posts: 6,521 Senior Member
    Man you did get a steal on those tanks.
    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    The hitch cover turned out great ! I didn't know that down your way there were that many goat farmers. But a cool looking goat any way ! :)
  • timctimc Senior Member Posts: 6,521 Senior Member
    Old Ron said:
    The hitch cover turned out great ! I didn't know that down your way there were that many goat farmers. But a cool looking goat any way ! :)
    BWahahahahahahahaaha!!!!!!!!!!!!!!!!
    thats funny right there I don’t care who you are!
    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    I was hopeing you would take it the way it was meant timc.
  • snake284snake284 Senior Member Posts: 21,662 Senior Member
    Around here you'd do it with live oak or mesquite. Either one of which is like cutting iron with a dull hack saw.
    Daddy, what's an enabler?
    Son that's somebody with nothing to do with his time but keep me in trouble with mom.
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    With the water tanks done now on to something new in the world of projects. I have no idea what but when it hits me I plan to go with the flow.I need to set up some type of stand for the lathe. It needs to be compact & easy clean up. Right now it is in the middle of the garage & needs to be cleaned & painted. The toy needs sanding & more primer on. 2 stocks are still kicking 1 needs more sanding. Gun parts need hot blueing but to cold yet for that at the country shop. Need to set up my greenhouse for starting tobacco plants. Like I said not really much to do ! lol
    :)
  • Farm Boy DeuceFarm Boy Deuce Senior Member Posts: 6,083 Senior Member


    I got the last coat of oil on everything. So far everything is looking about like I wanted. A friend described it as robust. Exactly what I was after. 

    Now to to finish the box. I made some stencils for the house numbers... now I have orange peel in my numbers. Oh well, let it dry and sand them off to try again. 
    I am afraid we forget sometime that the basic and simple things brings us the most pleasure.
    Dad 5-31-13
  • timctimc Senior Member Posts: 6,521 Senior Member
    edited March 2018 #550
    That’s looking pretty good, looking forward to seeing it finished. These little projects are fun and very gratifying knowing you built it yourself.

    My next project is extending my brick patio off the back porch another 13’x10’ so I have more room for  new fire pit.  Not looking forward to that. We ordered 2 Qubes of brick that should be in first of the week,  not doing much this weekend except for relaxing.
    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    I took the weekend off too. I have loads to do but needed the away time . This week I need to catch up on small repairs on car .....one truck (tommy lift connection ) ......get plants started .....& biggest of all clean up some of this stuff. Summer is coming on fast & most of my time will be at the country shop.
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member


    I got the last coat of oil on everything. So far everything is looking about like I wanted. A friend described it as robust. Exactly what I was after. 

    Now to to finish the box. I made some stencils for the house numbers... now I have orange peel in my numbers. Oh well, let it dry and sand them off to try again. 
    I hate it when I get close to a done stamp on a project & it goes sideways on me. I usually go to a plan B so I don't make a bad situation worse.
  • Farm Boy DeuceFarm Boy Deuce Senior Member Posts: 6,083 Senior Member
    Old Ron said:
    I hate it when I get close to a done stamp on a project & it goes sideways on me. I usually go to a plan B so I don't make a bad situation worse.
    Plan B Saturday evening was give up and drink beer. So I did. 
    I am afraid we forget sometime that the basic and simple things brings us the most pleasure.
    Dad 5-31-13
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    Old Ron said:
    I hate it when I get close to a done stamp on a project & it goes sideways on me. I usually go to a plan B so I don't make a bad situation worse.
    Plan B Saturday evening was give up and drink beer. So I did. 
    Some days plan B should have been plan A right off the bat ! I like to get things done but some days makes me go backwards. I usually have more than one project going at the same time & when things go bad with 2 or 3 of them the same day I really start thinking about drinking again. Usually I just grab my Pepsi & walk away cussing & talking to myself.
  • timctimc Senior Member Posts: 6,521 Senior Member
    Old Ron said:
    I hate it when I get close to a done stamp on a project & it goes sideways on me. I usually go to a plan B so I don't make a bad situation worse.
    Plan B Saturday evening was give up and drink beer. So I did. 
    Sometimes step back and reflect is the way to go. A breather clears the mind and opens it for new direction, especially when beer is added!
    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    Today I was caught with one of those easy quick jobs ...........not so quick !
    All I needed to do is replace a remote for my Tommy lift on my small truck.  8 1/2 hours later it is on. The rest of the todo list goes on tomorrows list. I was so sure that it would go quick I was outside in my flip flops at 40 out it got real cold real fast. This summer I will redo that bad designed peace of crapola. For now it works so done stamp.

  • timctimc Senior Member Posts: 6,521 Senior Member
    Any more I expect all jobs to go long. I’m not as fast as I used to be and an expert at nothing so I get in the the “What the hell?” Stage a lot.

    i got all the brick for the patio job yesterday, guess now nothing to do but grab a shovel and get at it. Having a hard time motivating on this one.
    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    That work is nothing but pain ! I am to a point that gravel looks just fine. My back hurts from all the bending over yesterday so this will be a 2 aspirin day I'm thinking. It's 24 here now & getting up to 40 so not much I want to do outside. I did manage to get my plants set up & started so hope to have 15 tobacco plants & 5 pepper plants this year. That stuff is kinda fun to mess with .......at times. Still have a bunch of 1/2 done projects so should grab one & move it on a bit. All this inside stuff will slow way down in the summer. ( until it gets to hot ) With snow & rain here now that is looking good.
  • timctimc Senior Member Posts: 6,521 Senior Member
    edited March 2018 #559
    Doing some craft stuff. Wanting a clock of some kind in the shop, something Texas themed. I like it but I think I’m going to make something else for the shop. Made out of 1/8” plate.



    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • zorbazorba Senior Member Posts: 18,469 Senior Member
    timc said:
    Any more I expect all jobs to go long. I’m not as fast as I used to be and an expert at nothing so I get in the the “What the hell?” Stage a lot.

    Pretty much, huh? Like I tell my wife, "Its a 10 minute job, so it shouldn't take more than 4 hours!".
    -Zorba, "The Veiled Male"

    "If you get it and didn't work for it, someone else worked for it and didn't get it..."
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    Yep a steel monster is coming alive !
    The clock looks great .......hard to tell the time on it but in Texas who cares what time it is !
    I did the same thing tim when I first started playing with my projects. I went as far as to make a logo / brand for the front of my lawn shed. It is a diamond K brand. ( I thought it was cool )
  • timctimc Senior Member Posts: 6,521 Senior Member
    Yes all kinds of fun little stuff comes to mind. We live a couple blocks from a very touristy area, once a month they have market days. At market days all items sold by the vendors have to be made by the vendor. This kind of stuff would sell well there. Maybe I have something to keep me busy in my retirement years, metal art and fire pits, market day here would be a good outlet to move some of the stuff out to make room for more projects.
    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    When I buy tools I always try to find ways for them to pay for there self. Maybe it is just my way to justify buying more tools. ( it works ! ) My tools bought my guns & in turn my guns protect my tools. Oh my sick mind has this all figured out !  :)
  • timctimc Senior Member Posts: 6,521 Senior Member
    Sick minds think alike! Lol

    the gun stuff I have pretty well covered, not much of anything I want anymore. Tools on the other hand, I need!
    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    Here I really need very little . My problems come with seeing things & thinking I can make that or I can make that better . Seems like everything I buy involves a project. ( like this steam whistle bought yesterday )

  • timctimc Senior Member Posts: 6,521 Senior Member
    Goi g to build you a train engine to put that on?
    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    B) Now there is an idea !
    You could use one of those to call the goats in to eat ! ........just saying .
    I need to get all the steel off my truck before the snow & rain hits again .
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    Back & yep there is still snow at the country shop.
    Here is the brand I made.

  • Farm Boy DeuceFarm Boy Deuce Senior Member Posts: 6,083 Senior Member
    timc said:
    Old Ron said:
    I hate it when I get close to a done stamp on a project & it goes sideways on me. I usually go to a plan B so I don't make a bad situation worse.
    Plan B Saturday evening was give up and drink beer. So I did. 
    Sometimes step back and reflect is the way to go. A breather clears the mind and opens it for new direction, especially when beer is added!
    I have a strong dislike of building patios. I have helped build three from native sandstone. 

    Maybe it is sandstone I dislike. After picking tons out of the wheat field as a kid and more tons for patios 
    I am afraid we forget sometime that the basic and simple things brings us the most pleasure.
    Dad 5-31-13
  • timctimc Senior Member Posts: 6,521 Senior Member
    I haven’t started on the patio yet, waiti g on an Excavator to dig the dirt. Spent the weeke with goofing off, finished the clock and started on another. I think the one I finished is going in my office at work.

    Ron, I like the brand, pretty cool, looks well done!
    timc - formerly known as timc on the last G&A forum and timc on the G&A forum before that and the G&A forum before that.....
    AKA: Former Founding Member
  • Old RonOld Ron Senior Member Posts: 3,400 Senior Member
    Thanks tim
    It was one of those I have a new plasma cutter .......what can I make deals.At that time I was wanting to set up a cnc table but didn't have the space I would need to do it.
    I have been thinking about a new gate or at least new steel posts at the country shop. Then I may make another brand for out there too.
    That patio brick laying is wayyyyyyyy to much work bent over in my mind. I would be crippled up for a week. Buying a few cases of beer & invite younger friends over comes to my mind with that kind of work.
Sign In or Register to comment.
Magazine Cover

GET THE MAGAZINE Subscribe & Save

Temporary Price Reduction

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW THIS MONTH'S ISSUE

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Get the top Guns & Ammo stories delivered right to your inbox every week.